Cleaning Solution for Print Heads - DTF and DTG
This regular Cleaning Solution is engineered to clean and flush Epson print heads. You can flush the print head, either manually with the syringe and tubing (flushing the printheads), or for printers that are cartridge-based, you can fill this cleaning solution into cartridges and use those cartridges as cleaning cartridges running up to 3 cleaning cycles with them.
As part of your daily maintenance at the end of the day when you finish, is recommended to use a capping station solution to do a wet cap to keep your print head optimized when doing DTF or DTG.
If you need a more aggressive cleaning solution check our clog breaker cleaning solution.
If you need to flush lines and lubricate the head for going on an extended period of time "vacation time" check our flushing solution.
PRO TIP: Mix and heat the cleaning solution with distilled water in a container to soak the print head and help with clogs. Doing a regular flush and a reverse flush when the mixture is hot will help remove the clog faster, but you also need to be patient. NOTE: MAKE SURE ELECTRONICS DO NOT GET WET.
- Refill cartridges, use them to clean your print head.
- Safe for Print Heads and capping stations.
1. This product is to clean and flush Epson print heads.
2. Bottle sizes may vary.