Limited Warranty Terms
Section 4:
Knight™ DTF Printers Series (
The limited warranty on Knight A3 PRO™ and Knight A2 PRO™ dual head printers is 6 months and for the
WHAT IS COVERED
4.1. The limited warranty will cover parts like the mainboard, power board, and power card are covered. A replacement part can be issued only 1 time per part during the limited warranty. Once a replacement part has been issued before or during the the limited warranty, the limited warranty is considered completed.
All defective parts replaced under the limited warranty must be shipped back to Kingdom DTF in Kissimmee, FL at the customer expense within 15 business days.
WHAT IS NOT COVERED
4.2. The limited warranty will not cover components that come in contact with the inks, this includes the ink system, print heads, capping station (ink station), dampers, ink pump, ink tank, ink mixer, ink lines and power pump are not covered.
Also, consumable parts like CR motor, encoder strip, belt, decoder, sensors, wiper, print head cables, or fans are not covered.
|
IMPORTANT By not using the Kingdom DTF brand inks and films will void any warranty for the printers or equipment. |
Section 5:
Knight A3™ Shaker & Oven,
The limited warranty on Knight A3™ Shaker & Oven and Knight A3 PRO™ Shaker & Oven and
WHAT IS COVERED
5.1. The limited warranty will cover electric parts like cables, film detector sensor, electric relay, and motors are covered. A replacement part will be issued only 1 time per part during the 6 months. Once a replacement part has been issued before or during the 6 months, the limited warranty is considered completed.
All defective parts replaced under the limited warranty must be shipped back to Kingdom DTF in Kissimmee, FL at the customer expense within 15 business days.
WHAT IS NOT COVERED
5.2. The limited warranty will not cover the front feed roller and its components, heat elements or heat tubes are not covered.
|
IMPORTANT By not using the Kingdom DTF brand inks and films will void any warranty for the printers or equipment. |
Section 6:
Panda DTF Printers and Machines (Partner brand - Panda/Procolor)
The limited warranty on Panda DTF Printers is for 24 to 36 months depending the item directly with the manufacturer been Panda/Procolor. Customers may self-install warranty parts or use their own technicians, but Kingdom DTF is not responsible for damages caused during self-repair or any warranty.
WHAT IS COVERED
6.1. The limited warranty will cover most parts like the mainboard, power board, CR motor and other motors, encoder strip, belt, sensors, wiper are covered. All warranty is direct with manufacturer.
WHAT IS NOT COVERED
6.2. The limited warranty will not cover components that come in contact with the inks, this includes the ink system, print head, capping station (ink station), dampers, ink pump, ink tank, ink mixer, ink lines and power pump are not covered.
|
IMPORTANT All warranty is direct with manufacturer. |
Section 7:
Left in blank on purpose
Section 8:
Additional Limited Warranty Terms
8.1. The Limited Warranty and Support are valid for the original purchaser only and are non
8.2. The limited warranty will not cover physical, cosmetics, or shipping damage by the carrier. In that case, is the customer's responsibility to open a direct claim with the carrier company to report any damages.
8.3. The limited warranty will not cover damage caused by disasters, such as fire, flood, lightning, improper electrical current, software problems, or interaction with non-Kingdom DTF products.
8.4. The limited warranty will not cover damage caused by improper installation, failure to follow the proper instructions, performing preventive maintenance, improper or abnormal use, misuse, neglect, or accident including but not limited to improper storage or transporting the product without the proper preparation and packaging, unauthorized adjustments, modifications or addition of accessories, normal wear and tear or external causes such as accidents or other actions or events beyond our reasonable control.
8.5. The limited warranty is VOID if the product has been altered or modified in any way, including but not limited to attempted repairs without prior authorization from Kingdom DTF or the use of unauthorized parts.
8.6. The Defective on Arrival (DOA) period is 10 days starting the date customer receives the shipment. If the product you purchased arrives with missing parts or non-working parts that are not covered by the limited warranty, we will cover the replacement part and shipping cost to send the part/s you need. After 10 days, the customer is responsible for any part and shipping costs.
8.7. Printers that have been converted (including diy printers) to DTF and are not DTF Printers from the manufacturer or maker are not covered by the limited warrantyor any warranty.
Section 9:
Customer Responsibilities and Maintenance
Your printer or machine is your partner and is important to use the correct volt, and accessories and do maintenance to keep running smooth. Most of the printers or machines are imported and the default volt is 220V (unless specified as 110V by the seller or manufacturer). Before connecting the printer or machine, is important to check these things.
POWER
9.1. Verify the printer or machine you purchased is 220V or 110V. Generally, there is a sticker where the power cord connects that said what volt is required. If don’t have that type of sticker, please ask your seller or manufacturer what volt is the printer or machine. If the printer or machine is by default 220V, you can give power to your printer or machine in two ways in the USA.
- 9.1.1. By a 220V connection
This outlet generally is the one that gives power to an electric stove or dryer. Also, can be a regular outlet that has been prepared with 220V by an electrician for use.
- 9.1.2. By a converter
You need a Converter Step Up from 110V to 220V. This will give the proper power to the printer or machine, you just connect the printer on the front of the converter in 220V and set the back of the converter to 110V that will be connected to your wall outlet (power coming out from the wall outlet).
-- Desktop printers usually need a converter of 300 Watts
-- Dual Head printers 12” inches and 17” inches usually need a converter of 1000 Watts
-- Powder Shaker 12” inches (A3 size ) usually need a converter of 2000 Watts
-- Powder Shaker 17” inches (A2 size ) usually need a converter of 3000 Watts
-- Bigger and 2 or 4 Heads 24” inches printers and shakers is better to prepare a place to have a connection just for them since required too much power and watts. We do not recommend using a converter with bigger printers or machines.
|
IMPORTANT WARNING |
MAINTENANCE
Is your responsibility to learn and do the proper maintenance on your printer by understanding that inks are water-based textile inks and will clog the Printheads if the machine is left unused for more than a couple of days.
Providing a clean and climate-friendly workspace to print in and keeping your printer clean all the time helps to run smoothly. Maintenance is the key and should be given as part of a routine. These are some things you can do.
9.2. Do nozzle checks every day before starting to print any job. This way you can tell if the printhead is ready to print or is missing nozzles and needs to be clean.
9.3. Clean the printhead and wiper every day after you finish printing for the day. This is done to prevent the printhead to get clogged. A cleaning solution is recommended for use when necessary.
9.4. Wet capping station every day after you finish printing for the day. This helps the printhead underneath to stay wet and to prevent the printhead to get clogged. A cleaning solution or capping station solution is recommended for use.
9.5. If the printer is not used frequently, please use a syringe and rotate the ink on the lines and dampers. This helps prevent clogging of the lines and draws air out of the lines.
9.6. You may be required to do troubleshooting and repairs with technicians' help and direction.
Have Questions?
For questions or any concerns about policies, please contact us at info@kingdomdtf.com